Weathered Blue Steel Panels

Transform your space with the look of time-worn metal—minus the weight and hassle. Weathered Blue Steel Panels is a removable, peel-and-stick wallpaper that brings cool blue-gray patina and vertical panel lines to modern, coastal, and industrial interiors. Made for renters and refreshers alike, it installs cleanly and comes down without the drama.

PVC-free and printed with eco-friendly, water-based inks.

Key Features

• Peel-and-stick, removable, and renter-friendly
• PVC-free substrate with low-odor, water-based inks
• Matte, non-reflective finish for a refined, real-steel look
• Panels align edge-to-edge for a continuous design
• Works on smooth, clean, properly painted walls, doors, and cabinets
• Repositionable during install; removes cleanly from most primed surfaces
• Great for accent walls, home offices, bedrooms, and entryways

Sizes & Coverage

Each roll (panel) is 24 in wide and available in heights up to 120 in.

• How many panels do you need? Measure your wall width in inches and divide by 24. Round up to the next whole number.
• Choose a panel height that is 2–4 in taller than your wall to allow for trimming at the ceiling and baseboard.

Surface Prep

• Install on smooth, dry, dust-free, non-textured walls painted with standard, non-stick interior paint.
• Allow fresh paint to cure fully (typically 30 days) before installation.
• Wipe walls with a damp, lint-free cloth and let dry completely.
• Not recommended on heavy texture, high-humidity areas without ventilation, or on paints containing Teflon/slick additives.

Installation Guide

1. Tools: tape measure, level, pencil, utility knife, smoothing tool or soft squeegee, step stool.
2. Plan your layout. Mark a level vertical line where your first panel will go.
3. Peel 6–10 in of the backing from the top of the first panel. Align the top and the level line.
4. Stick and smooth downward, working from the center out to push out air. Continue peeling the backing a little at a time.
5. Install the next panel edge-to-edge (do not overlap), aligning the printed panel lines for a seamless flow.
6. Trim excess at ceiling, baseboards, and around outlets using a sharp blade.

Tip: If a bubble appears, gently lift and reapply, or use a pin to release air and smooth.

Care & Removal

• Wipe clean with a soft, damp cloth; a small amount of mild soap is okay. Avoid abrasives and strong chemicals.
• For removal, slowly peel from a top corner at a low angle. Warm the panel with a hair dryer on low if needed to ease release.

Why You’ll Love It

• Authentic weathered-steel character in a calm blue tone
• Instant upgrade without permanent commitment
• Cleaner choice: PVC-free material and water-based inks

For best results, order a sample to test color and adhesion in your space.