Wrap your space in the cozy charm of a knit-inspired design. Warm Cable Knit Embrace is a removable wallpaper that brings the inviting look of a classic cable sweater to your walls—ideal for bedrooms, living rooms, nurseries, and reading nooks. Made from a PVC-free material and printed with eco-friendly, water-based inks, it’s a stylish and responsible choice for modern homes and rentals.
Key Features
Removable and rental-friendly; repositionable during installation
Panels are 24 inches wide with height options up to 120 inches
PVC-free substrate printed with eco-friendly, water-based inks
Designed for smooth, properly painted interior walls
Great for accent walls, headboard backdrops, and whole-room warmth
Sizing & Coverage
Each roll is a 24-inch-wide panel. Choose a height that matches your wall (up to 120 inches) and trim any excess during install.
Measure the total width of your wall in inches.
Divide by 24 to get the number of panels needed, then round up.
Consider ordering one extra panel for pattern alignment and trimming.
Example: A 120-inch-wide wall ÷ 24 = 5 panels.
Installation Guidance
Prep the surface: Walls must be smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Fill holes and sand bumps. Wipe with a damp cloth and let dry.
Plan your layout: Mark a straight vertical guideline with a level where your first panel will go.
Apply: Starting at the top, align the first panel to your guideline. If your material has a backing, peel back 6–12 inches at a time and smooth downward with a felt squeegee or soft cloth, working from the center outward to remove air.
Match the pattern: Align the cable-knit design as you place the next panel. Gently lift and reposition as needed to achieve a near-seamless look.
Finish: Firmly press edges and seams. Trim along ceilings, baseboards, and around outlets with a sharp blade.
Tip: Avoid installing in high humidity. If possible, turn off HVAC/fans during install and resume gentle airflow afterward.
Care & Removal
Dust or wipe with a soft, damp microfiber cloth.
Avoid harsh cleaners, bleach, and abrasives.
Spot clean gently with mild soap and water; blot, don’t scrub.
To remove, slowly peel from a top corner at a low angle. If needed, warm the panel slightly with a hair dryer to ease release.
Sustainability
This wallpaper is PVC-free and printed with eco-friendly, water-based inks, helping you create a beautiful, cozy space with materials you can feel good about.
Good to Know
Best for smooth, non-textured, interior walls painted with quality primer and paint.
Not recommended for direct-splash or high-moisture areas (e.g., showers).
Colors may vary slightly between print runs; order enough panels at the same time for the best match.
Always test a small, inconspicuous area if you’re unsure about your surface.
