Bring the cozy charm of a mountain retreat to any room with this removable wallpaper. Warm Cabin Wood Paneling recreates the organic texture and grain of rustic timber, instantly adding depth and comfort to modern and traditional spaces alike. PVC-free and printed with eco-friendly, water-based inks, it’s a stylish, sustainable choice for home decorators and renters.
Key Features
Removable and renter-friendly: Designed to install, reposition, and remove cleanly on most properly painted walls.
Authentic wood look: Rich, warm tones and realistic grain deliver the feel of cabin-style paneling without the tools or mess.
Eco-conscious: PVC-free material printed with water-based inks.
Made-to-fit panels: Each roll is 24 in wide and available in heights up to 120 in.
Low-glare finish: Matte surface minimizes reflections for a natural, photo-ready look.
Great for many spaces: Living rooms, bedrooms, offices, entryways, and accent walls.
Sizing and Coverage
Choose a height that matches your wall (up to 120 in). For width, measure your wall and divide by 24 inches, then round up to the next full panel.
Example: A 10 ft (120 in) wide wall requires 5 panels (120 ÷ 24 = 5).
Add a small trimming margin if your wall is not perfectly square.
Installation Guidance
Prep the wall: Install on smooth, clean, dry, fully cured paint. Wipe dust and let dry.
Plan the layout: Start from a plumb line; unroll and check panel order and pattern direction.
Peel and stick: Peel 6–12 inches of backing, align the top, and apply.
Smooth as you go: Use a felt squeegee or soft cloth, working from center outward to remove bubbles.
Match seams: Butt panels edge-to-edge; do not overlap.
Trim edges: Use a sharp blade along ceilings, baseboards, and outlets.
Reposition if needed: Gently lift and realign; avoid stretching the material.
Allow to set: Lightly smooth again after 1–2 hours if any edges lift.
Surface Compatibility
Best on smooth, sealed walls painted with eggshell, satin, or semi-gloss.
Wait at least 30 days after painting before installation.
Avoid heavy texture, raw drywall, unsealed plaster, high moisture, or stain-resistant/silicone-enhanced paints.
Care and Removal
Dust regularly; wipe with a damp microfiber cloth and mild soap if needed.
Avoid abrasives, bleach, and strong solvents.
To remove, peel slowly at a low angle. If resistance occurs, warm with a hair dryer and continue.
Note: Color may vary slightly from screen to print due to display settings and lighting conditions.
