Transform your wall with the modern depth of Urban Slate Geo-Structure. This removable wallpaper layers faceted geometry with slate-inspired texture to create a bold, architectural focal point—printed on a premium, PVC-free surface with eco-friendly, water-based inks.
Key Features
Removable and renter-friendly: Installs cleanly and comes down without residue on most properly painted walls.
PVC-free material: Safer for your home and the planet.
Eco-conscious printing: Vivid, low-odor color made with water-based inks.
Seamless look: Edge-to-edge panel alignment for a continuous mural effect.
Matte, glare-free finish: Crisp detail with a refined, modern surface.
Made to order: Freshly printed for consistent color and reduced waste.
Sizing and Coverage
Each roll is a vertical panel measuring 24 inches wide and available in heights up to 120 inches.
Choose the panel height that meets or slightly exceeds your wall height for clean trimming.
To find how many panels you need: measure your wall width (in inches), divide by 24, and round up to the next whole number.
Example: a 110-inch wide wall needs 5 panels (5 x 24 = 120 inches).
Installation Guidance
Prepare the wall: Ensure it is smooth, clean, dry, and primed/painted. Allow fresh paint to cure for at least 2–3 weeks.
Plan and mark: Measure your starting point and draw a plumb vertical guideline with a level.
Apply panel 1: Align to the guideline. If self-adhesive, peel a small section of backing and smooth as you go. If paste-the-wall, apply paste as directed and hang the panel.
Smooth: Use a felt squeegee or soft cloth, working from the center outward to remove bubbles—avoid stretching the material.
Add panels: Butt-join edges (no overlap) and match the design across each seam.
Trim: Carefully trim excess at the ceiling, baseboard, and around outlets with a sharp blade.
Best results on smooth, eggshell-to-semi-gloss painted walls. Not recommended for heavy texture, high moisture, or surfaces with low-/no-VOC paint that hasn’t fully cured.
Care
Wipe gently with a damp microfiber cloth; use mild soap if needed.
Avoid abrasives, bleach, and harsh chemicals.
For removal, slowly pull at a low angle; warm the surface slightly if needed to ease release.
Materials & Sustainability
PVC-free substrate for a cleaner indoor environment.
