Urban Forge Riveted Panels

Give your space the bold, industrial character of forged metal with the ease of removable wallpaper. Urban Forge Riveted Panels delivers a realistic riveted-steel look that transforms accent walls, hallways, home offices, and rental spaces—without the mess or commitment of traditional finishes.

All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.

Key Features

• Industrial, riveted-metal design with crisp, high-resolution detail
• Removable and renter-friendly for most properly painted walls
• PVC-free substrate printed with eco-friendly, water-based inks
• Matte, glare-minimizing surface for a realistic look
• Panels align cleanly for a seamless, professional finish
• Great for accent walls, entryways, studios, and modern loft-inspired interiors

Size & Coverage

• Roll width: 24 inches (about 61 cm)
• Available heights: up to 120 inches (about 305 cm)
• Coverage estimate: each roll covers 2 feet of wall width; add extra for trimming and pattern alignment
• Tip: Measure your wall height and select the next size up to allow for ceiling and baseboard trimming

Materials & Sustainability

• PVC-free wallpaper material
• Eco-friendly, water-based inks with low odor
• Made for indoor residential and light commercial use

Installation Guidance

1. Acclimate: Unroll and lay flat for a few hours before installing.
2. Prep the wall: Surface must be smooth, clean, dry, and fully cured. Remove dust, fill holes, and remove outlet covers. Fresh paint should cure per manufacturer guidance.
3. Create a plumb line: Use a level to mark a straight vertical line as your starting guide.
4. Apply the first panel: Starting at the top, align to the plumb line. Smooth downward with a squeegee or soft cloth, working from the center outward to remove air.
5. Add panels: Install the next panel edge-to-edge (or with a slight overlap if preferred), carefully aligning the design. Avoid stretching the material.
6. Trim: Use a sharp blade to trim at ceilings, baseboards, and around fixtures.
7. Settle time: Allow 24 hours for the adhesive bond to set.

Care & Removal

• Wipe clean with a soft, damp cloth; use mild soap if needed
• Avoid abrasives, bleach, or harsh chemicals
• To remove, peel slowly at a low angle; use gentle warmth if necessary to ease release
• Best results on smooth, properly primed and painted walls; weak paint or primer may affect clean removal

Note: Colors may vary by screen. For the best match and to test surface compatibility, consider ordering a sample first.