Bring the warmth of sun-baked canyon walls into your space. Terracotta Canyon Flow is a removable wallpaper that blends flowing, organic lines with earthy terracotta tones—perfect for accent walls, bedrooms, nurseries, and creative workspaces. Each roll is PVC-free and printed with eco-friendly, water-based inks for a beautiful, responsible refresh.
Key Features
Removable and renter-friendly: Peel off cleanly without damaging most painted walls.
Repositionable during install: Lift, adjust, and smooth for a flawless finish.
Eco-conscious: PVC-free material printed with water-based inks.
Sized for easy planning: Rolls are 24 inches wide and up to 120 inches (10 ft) high.
Seamless look: Install panels edge-to-edge for a smooth, continuous design.
Versatile use: Ideal for smooth, non-textured walls, doors, furniture, and backs of bookcases.
Care Instructions
Wipe gently with a soft, damp cloth.
Avoid abrasive pads, bleach, and solvent-based cleaners.
For marks, start with mild soap and water; test in an inconspicuous spot first.
Installation Guidance
Prepare the surface: Ensure walls are smooth, clean, dry, and fully cured (wait at least 30 days after painting). Avoid heavily textured or flaky surfaces.
Plan your layout: Measure your wall height and select a roll height up to 120 inches. Add a little extra for trimming at the ceiling and baseboard.
Create a plumb line: Use a level to mark a straight vertical line to guide your first panel.
Apply the first panel: Peel 6–8 inches of backing, align the top to your plumb line, and smooth outward with a squeegee or soft cloth as you go.
Finish and trim: Continue removing the backing, smoothing to remove air, then trim excess with a sharp utility knife.
Repeat for remaining panels: Butt-join edges for a near-invisible seam. If bubbles appear, gently lift and reapply; do not force air through the surface.
Good to Know
Best on smooth, eggshell-to-semi-gloss painted walls. Not recommended for high-texture, damp, or freshly painted surfaces.
Color may vary slightly by screen; consider testing a small area before full installation.
Remove slowly at a 180° angle to help protect paint during take-down.
