Bring quiet texture and natural warmth to your space with this refined, ashwood-inspired vertical weave. Subtle and modern, this removable wallpaper adds depth without overwhelming your decor. Printed on a PVC-free material with eco-friendly, water-based inks for a beautiful, low-odor finish that’s safer for your home.
Key Features
Removable and renter-friendly: Designed for clean removal on most properly primed, smooth walls.
Eco-conscious: PVC-free substrate printed with water-based inks.
Sized to fit: Each roll is 24 inches wide with selectable heights up to 120 inches for floor-to-ceiling coverage.
Elegant texture: A subtle vertical weave elongates walls and complements minimalist, modern, and organic interiors.
Low odor: Water-based printing helps keep installation and living spaces comfortable.
Sizing and Coverage
Panel width: 24 in (61 cm).
Panel height: Choose the closest height to your wall, up to 120 in (305 cm). For the best fit, select a height 1–2 inches taller for trimming at the ceiling and baseboard.
How many panels? Measure your wall width in inches, divide by 24, and round up. Consider 5–10% extra for trimming and pattern alignment, especially at corners or around obstacles.
Installation Guidance
Install on smooth, clean, and fully cured (at least 30 days) painted or primed walls. Not recommended on textured surfaces, high-gloss or stain-resistant paints, or areas with heavy moisture.
Prep: Wipe walls to remove dust and let dry. Unroll panels and allow them to relax flat before installation.
Plan: Use a level to mark a plumb line where the first panel will go. Starting from a true vertical ensures straight seams.
Apply first panel: Position from top to bottom along the plumb line, smoothing outward to remove air as you go.
Continue: Align the vertical weave and butt edges edge-to-edge (do not overlap). Smooth firmly to set seams.
Trim: Use a sharp blade to trim excess at ceilings, baseboards, and around outlets.
Removal: Lift a corner and peel slowly at a low angle. If needed, warm gently with a hair dryer on low to ease release.
Care Instructions
Dust regularly or wipe with a soft, damp cloth.
Use mild soap only if needed; rinse and dry with a clean cloth.
Avoid abrasive pads, bleach, and solvent cleaners.
Keep away from direct water exposure and prolonged high humidity.
Good to Know
For best results, order a sample to test color and adhesion on your wall.
Color may vary slightly due to screen settings and print runs; install panels from the same batch for the most consistent look.
