Bring effortless calm to your space with Serene Sandstone Waves, a removable wallpaper inspired by the soft, flowing lines of weathered stone. Designed for modern, renter-friendly decorating, this wall covering installs cleanly and removes without drama—perfect for living rooms, bedrooms, entryways, and home offices.
Each roll is 24 inches wide and cut to your selected height (up to 120 inches), making it simple to cover full walls or create striking accent areas. All our wallpapers are PVC-free and printed with eco-friendly, water-based inks.
Key Features
Calming, organic design: Subtle wave pattern adds warmth and texture without overwhelming your space.
Removable and renter-friendly: Designed for clean removal from most properly painted, smooth walls.
Eco-conscious: PVC-free substrate printed with water-based inks.
Flexible sizing: 24-inch-wide rolls, available in heights up to 120 inches for a tailored fit.
Seam-aware layout: Install panels edge-to-edge for a continuous flow.
How to Measure
Measure the total width of your wall in inches.
Divide by 24 to determine how many rolls you need, then round up to the next whole number.
Measure wall height and select the roll height that matches or exceeds it (up to 120 inches). Allow 2–4 inches for trimming at the top and bottom.
Installation Guidance
Prepare the surface: Walls should be smooth, clean, dry, and fully cured (wait at least 30 days after painting). Not recommended for textured or damp surfaces.
Plan your layout: Draw a level vertical guideline where your first panel will go.
Apply the first panel: Align to the guideline and smooth from top to bottom, pressing out air with a plastic squeegee or soft cloth.
Match and align: Install subsequent panels edge-to-edge, carefully aligning the pattern.
Trim and finish: Use a sharp blade to trim excess at ceilings, baseboards, and around outlets.
Tip: Avoid installing in high-splash zones or areas with heavy steam. If your walls were recently painted or are coated with specialty/low-VOC paints, perform a small adhesion test first.
Care Instructions
Dust regularly with a dry microfiber cloth.
Spot clean with a damp cloth and mild, non-abrasive soap if needed; avoid harsh chemicals and scrubbing.
Blot spills promptly and allow to air dry.
Note: Colors may vary slightly due to monitor settings and lighting. For best results, order all rolls at the same time to ensure a consistent print run.
