Bring the industrial warmth of board-formed concrete to your space—without the weight or mess. This removable, peel-and-stick wallpaper recreates the texture and grain of raw concrete formwork for a modern, loft-inspired look that’s perfect for feature walls, entryways, and creative studios.
All wallpapers are PVC-free and printed with eco-friendly, water-based inks for a low-odor, home-safe finish.
Key Features
Removable and repositionable peel-and-stick wallpaper
PVC-free substrate printed with eco-friendly, water-based inks
Matte, glare-free finish with realistic formwork panel lines
Rolls are 24 inches wide; choose heights up to 120 inches for floor-to-ceiling coverage
Edge-to-edge pattern alignment for a seamless wall
Rental-friendly and damage-free removal from most painted walls
Size and Coverage
Each roll measures 24 inches wide by your selected height (up to 120 inches). To estimate how many panels you need, measure your wall width in inches and divide by 24; add one extra panel for pattern alignment and trimming. Allow 0.5–1 inch trim at the top and bottom.
Surface Compatibility
Best on smooth, clean, non-textured, latex-painted walls
Wait at least 30 days after painting before installation
Not recommended on textured surfaces, brick, unsealed wood, or high-moisture areas with direct splashes/steam
Test a small area if walls have stain-resistant or scrubbable paints
Installation Guidance
Unroll panels and let them relax flat for 24 hours.
Clean the wall with mild soap and water; let it dry completely.
Mark a plumb line 24 inches from your starting edge.
Peel back 6–8 inches of the liner and align the top of the first panel to the plumb line.
Apply from top to bottom, smoothing outward with a felt squeegee to remove air.
Butt edges (do not overlap) and match the formwork seams across panels.
Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
Tip: Install at room temperature (65–75°F) in a dust-free space. If misaligned, gently peel back and reposition.
Care Instructions
Wipe clean with a soft, damp cloth
Avoid abrasives, bleach, and solvent cleaners
Indoor use only; avoid prolonged high humidity or direct water
Removal
Lift a top corner and peel slowly at a low angle. The adhesive is designed to release cleanly from most properly cured, painted walls.
Good to Know
Low-odor, PVC-free materials with water-based inks
Colors may vary slightly by monitor; ordering a sample is recommended
