Bring structure, rhythm, and modern artistry to your space with this removable wallpaper. The Modernist Geometric Mosaic Wall blends clean lines and tessellated shapes to create a statement feature in living rooms, bedrooms, entryways, and home offices—without a permanent commitment.
PVC-free and printed with eco-friendly, water-based inks, this design offers a stylish, responsible choice for home decor.
Key Features
Removable, renter-friendly wallpaper designed for easy update and clean removal from most properly primed walls.
Contemporary geometric mosaic pattern that adds depth and balance to modern interiors.
Panels/rolls are 24 inches wide and available in heights up to 120 inches for floor-to-ceiling coverage.
Edge-to-edge alignment for a seamless look when installing multiple panels.
PVC-free substrate with eco-friendly, water-based inks.
Best on smooth, clean, fully cured painted surfaces.
Size and Coverage
Each roll is 24 inches wide, with selectable heights up to 120 inches.
To estimate panels: measure your wall width (in inches), divide by 24, and round up.
Example: a 10 ft wall (120 inches) typically needs 5 panels.
Choose a panel height equal to your wall height and add 1–2 inches for trimming at the ceiling and baseboard.
Installation Guidance
For best results, install on smooth, dry, non-textured walls painted with a quality primer and fully cured (typically 30+ days for fresh paint). Avoid surfaces like heavy texture, brick, stucco, or stain-resistant/VOC-blocking paints.
Prepare: Wipe walls with a damp, lint-free cloth and let dry completely. Mark a plumb vertical guideline using a level where your first panel will start.
Plan: Lay out panels on the floor to understand pattern flow and order.
Start: Beginning at the top of the first panel, peel back 6–8 inches of the backing.
Align: Match the top edge and your plumb line. Lightly tack the exposed adhesive to the wall.
Smooth: Using a felt-edge squeegee or soft cloth, smooth from the center outward while slowly removing more backing.
Repeat: Hang remaining panels edge-to-edge (butt seams), aligning the pattern as you go. Do not stretch the material.
Trim: Use a sharp utility knife and straightedge to trim at ceiling, baseboard, and around outlets/switches.
Reposition: If needed, gently lift and realign. Work slowly to avoid creases or tension.
Ideal room temperature during install: moderate, with low humidity. If walls were recently painted, ensure full cure before installation.
Care and Maintenance
Dust regularly; spot clean with a soft, damp cloth.
For tougher marks, use mild soap diluted in water and wipe gently.
Avoid abrasives, bleach, or harsh chemicals.
Not recommended for high-moisture areas with direct water exposure (e.g., inside showers).
To remove, slowly peel from a top corner and pull back at a low angle.
Good to Know
Color may vary slightly between screens and the final print.
Order all panels for a project at the same time to maintain color continuity.
Test a small area first if you’re unsure about wall paint or finish compatibility.
