Bring urban energy and refined geometry to your space with the Metropolis Modern Mural. This removable wallpaper transforms feature walls, bedrooms, offices, and entryways with architectural lines and city-inspired rhythm—without the commitment of paint or traditional wallcoverings. Our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.
Key Features
Removable, renter-friendly wall mural designed for easy refreshes and clean removal.
Panels (rolls) measure 24 inches wide with heights available up to 120 inches.
PVC-free material printed with water-based inks—no harsh solvents.
Edge-to-edge alignment for a seamless, continuous design across panels.
Ideal for smooth, properly primed, and painted interior walls and other flat surfaces.
Sizing and Coverage
Each roll covers a 24-inch-wide column of your wall. To estimate how many rolls you need:
Measure your wall width in inches and divide by 24.
Round up to the next whole number to get the number of rolls.
Select a roll height equal to or slightly taller than your wall height (up to 120 inches) to allow for trimming.
Example: A 10-foot-wide wall (120 inches) typically requires 5 rolls at your chosen height.
Installation Guidance
Prepare the surface: Ensure walls are smooth, clean, dry, and fully cured (fresh paint should cure per manufacturer guidance).
Plan your layout: Mark a level vertical line to start Panel 1. Install left to right for easiest alignment.
Apply Panel 1: Position carefully and smooth from the center outward using a felt squeegee or soft cloth to remove air.
Align subsequent panels: Butt edges gently edge-to-edge for a near-invisible seam; avoid stretching the material.
Trim excess at ceiling, baseboard, and corners with a sharp blade and straightedge.
For best results: Work in a dust-free area at room temperature and avoid high-humidity conditions during install.
Note: Follow the instructions appropriate to your wallpaper’s application method. Surfaces with heavy texture, contamination, or moisture may reduce adhesion.
Care and Removal
Dust regularly with a dry microfiber cloth.
Spot-clean with a damp, lint-free cloth and mild soap if needed; avoid abrasives, bleach, and harsh chemicals.
Do not soak seams. Always test cleaning in an inconspicuous area first.
To remove, lift a corner and slowly peel back at a low angle. Take your time for the cleanest release.
Sustainable by design: PVC-free materials and water-based inks mean stylish walls with a lighter environmental footprint.
