Bring calm, coastal energy to your space with Luminous Horizon Wave — a modern, removable wallpaper featuring softly flowing wave forms and a radiant horizon effect. Designed for renters and refreshers alike, this peel-and-stick wall covering goes up cleanly and removes without damage on most properly painted walls.
Key Features
Removable and renter-friendly: reposition during install and peel off cleanly on most smooth, painted surfaces
PVC-free material printed with eco-friendly, water-based inks
Matte, low-glare finish enhances the artwork and reduces reflections
Panels are 24 inches wide and available in heights up to 120 inches
Seam design supports precise alignment for a continuous wave pattern
Ideal for accent walls, entryways, bedrooms, studios, and creative workspaces
Sizing and Coverage
Each panel is 24 inches (2 ft) wide. Choose a panel height that meets or slightly exceeds your wall height (up to 120 inches).
Measure your wall width in inches, divide by 24, then round up to the next whole panel.
Add 2–4 inches in height for trimming at the ceiling and baseboard.
We recommend ordering an extra panel if your wall width is near a rounding threshold or if you plan to wrap around corners.
Installation Guidance
Prepare the surface: Walls must be smooth, clean, fully dry, and cured. Wait at least 30 days after painting. Avoid fresh paint, primers with stain blockers, or slick/low-surface-energy coatings.
Clean the wall with mild soap and water; let it dry completely. Remove dust and switch plate covers.
Plan your layout: Use a level to mark a plumb line where your first panel edge will go.
Start at the top: Peel back a small section of the liner, align the top of the panel to the ceiling line, and adhere lightly.
Smooth as you go: Working downward, peel more liner while smoothing with a felt squeegee or soft cloth to remove bubbles.
Align the next panel: Butt seams or slightly overlap as desired, matching the wave pattern. Continue panel by panel.
Trim excess at ceiling, baseboards, and around outlets with a sharp utility knife. Replace covers and admire your refreshed space.
Surface and Room Suitability
Best on: Smooth, painted drywall (eggshell, satin, or semi-gloss), primed wood, and other non-textured surfaces.
Not recommended on: Textured walls, brick, unpainted drywall, high-humidity or steam-prone areas, or surfaces with dust, grease, or silicone-based paints.
Always test a small area first to confirm adhesion and clean removal for your specific surface.
Care Instructions
Wipe gently with a soft, damp cloth. For tougher spots, use mild soap and water.
Avoid abrasive tools, harsh chemicals, and excessive moisture.
Protect from direct, prolonged water contact and heavy abrasion.
Thoughtfully made without PVC and printed using water-based inks, Luminous Horizon Wave offers a modern, eco-conscious way to transform your walls with tranquil, gallery-quality design.
