Transform your space with the warm sophistication of a gold-kissed brick motif. Gilded Treasury Brick Wall brings the character of aged masonry and the glow of modern glamour to feature walls, entryways, bedrooms, and home offices—all with the convenience of removable wallpaper.
Key Features
Removable and renter-friendly: Installs cleanly and removes without damaging most properly painted walls.
Premium look: Rich, realistic brick artwork with a soft matte finish for a refined, non-glare appearance.
Eco-conscious: PVC-free substrate printed with eco-friendly, water-based inks.
Custom-fit panels: Rolls are 24 inches wide and cut to your selected height (up to 120 inches) for easy alignment.
Seamless alignment: Designed for edge-to-edge panel joins that visually blend into a continuous wall.
Made for smooth walls: Best on clean, dry, smooth, and non-textured painted surfaces.
Sizing & Coverage
Each roll is 24 inches wide and up to 120 inches high.
Measure your wall height and select the roll height that meets or slightly exceeds it for trimming.
Determine how many rolls you need: total wall width in inches ÷ 24, then round up to the next whole number.
For best results, add 1–2 inches of extra height to trim at the ceiling and baseboard.
Installation Guidance
Prep the wall: Ensure the surface is smooth, dust-free, and fully cured (new paint should cure for at least 30 days). Wipe with a damp microfiber cloth and let dry.
Plan your layout: Use a level to mark a plumb line where your first panel will go.
Apply the first panel: Align the top of the panel with a slight overlap at the ceiling. Peel back the first 6–12 inches of backing, stick, and smooth downward as you continue to remove the backing.
Smooth and trim: Use a felt or rubber squeegee to remove bubbles. Trim excess at the ceiling, baseboard, and around outlets with a sharp utility knife.
Join the next panels: Align the pattern and butt-join edges without overlapping. Smooth from center outward.
Settle time: Allow 24 hours for the adhesive to settle before heavy cleaning or hanging items against the wall.
Removal
To remove, slowly peel from a top corner at a low angle. If needed, warm gently with a hair dryer on low to ease release. Properly prepared and painted walls typically remain undamaged.
Care Instructions
Wipe with a soft, damp microfiber cloth; mild soap may be used if necessary.
Avoid abrasive pads, harsh chemicals, and bleach.
Suitable for low to moderate humidity spaces; ensure good ventilation in bathrooms. Avoid direct, continuous water contact.
Do not scrub seams; pat dry after cleaning.
Material & Sustainability
Our wallpapers are PVC-free and printed with eco-friendly, water-based inks for low odor and a cleaner indoor footprint—made to look beautiful and be kinder to your home and the planet.
