Transform your space with a dramatic onyx-inspired motif accented by gold-toned fracture lines. Gilded Onyx Fracture brings modern luxe to walls while staying renter-friendly and easy to refresh. All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.
Key Features
Bold onyx marbling with elegant, gold-toned accents for statement-making style.
Removable and renter-friendly for easy updates without long-term commitment.
Rolls measure 24 inches wide; choose panel heights up to 120 inches for floor-to-ceiling coverage.
Matte, low-glare finish that photographs beautifully and elevates any room.
PVC-free material printed with water-based inks for a safer, eco-conscious choice.
Made to order to help reduce waste.
Specifications
Panel width: 24 in
Available heights: up to 120 in
Coverage per 24 in × 120 in panel: approximately 20 sq ft
Best for smooth, clean, fully cured painted walls
Installation Guidance
Prep the surface: Walls must be smooth, clean, dry, and fully cured (allow new paint to cure for at least 30 days).
Plan your layout: Measure, find a plumb line, and start in a low-visibility corner. Cut panels to height, leaving a small trim margin at the top and bottom.
Apply the first panel: Align to your plumb line. If using a self-adhesive backing, peel 6–12 inches at a time and smooth downward. If using paste-activated material, follow paste instructions from your adhesive supplier.
Smooth and align: Use a felt squeegee or soft cloth to remove air bubbles. Butt edges (do not overlap) and match the design as you go.
Trim: Use a sharp blade to trim excess at ceilings, baseboards, and around outlets.
Repeat: Continue panel by panel, checking level frequently for a seamless finish.
Care Instructions
Wipe gently with a soft, damp cloth; use mild soap only if needed.
Avoid abrasive cleaners, bleach, or heavy scrubbing.
Not recommended for highly textured walls or high-moisture areas.
To remove, slowly peel back at a low angle; warming the panel with a hair dryer on low can help release adhesion.
