Elevate your space with the moody glamour of Gilded Noir Brick. This removable wallpaper layers an inky, brick-inspired texture with subtle golden accents—perfect for modern lofts, industrial interiors, and statement accent walls. Designed for renters and refreshers alike, it transforms rooms without the long-term commitment.
Key features
Removable, renter-friendly design made for easy updates
24-inch-wide panels with heights up to 120 inches for a tailored floor-to-ceiling fit
PVC-free material printed with eco-friendly, water-based inks
Crisp, richly detailed print that brings realistic brick dimension to smooth walls
Ideal for accent walls, entryways, bedrooms, offices, and creative DIY projects
Sizing and coverage
Each roll is 24 inches wide and available in heights up to 120 inches. Measure the width of your wall and divide by 24 to estimate how many panels you will need. When in doubt, add an extra panel to accommodate trimming and pattern alignment.
Example: A 10-foot (120-inch) wide wall typically needs 5 panels (120 ÷ 24 = 5).
Allow a small margin for trimming at the ceiling, baseboards, and around outlets or windows.
Installation guidance
Prepare the surface: Apply only to smooth, clean, dry, and fully cured painted walls (allow new paint to cure for at least 30 days). Wipe walls with a damp, lint-free cloth and let dry.
Plan your layout: Start from the straightest edge of the wall. Use a level to mark a plumb line as your guide.
Apply the first panel: Align the top of the panel with your plumb line. Peel 6–12 inches of backing, stick lightly, then smooth downward with a felt squeegee or soft cloth, peeling more backing as you go.
Smooth and align: Work from the center outward to remove bubbles. Install the next panel edge-to-edge, aligning the pattern.
Trim: Use a sharp utility blade and straightedge to trim at ceilings, baseboards, and around fixtures.
Settle: Allow 24 hours for the adhesive to set before heavy cleaning or hanging items against the wall.
Care instructions
Wipe gently with a soft, damp microfiber cloth; a mild soap solution can be used for spots.
Avoid abrasive sponges, harsh chemicals, and excess water.
For removal, peel slowly at a low angle; warming the panel with a hair dryer on low can help release the adhesive.
Surface compatibility
Best on smooth, painted, non-textured walls and primed drywall.
Not recommended for heavy texture (orange peel, knockdown), high-humidity zones with poor ventilation, or surfaces painted with stain-resistant/“non-stick” coatings.
Sustainability
Printed on PVC-free material with eco-friendly, water-based inks for a beautiful finish that’s better for your home and the planet.
