Bring coastal calm and artisanal character to your space with this removable wallpaper. The Azure & Ochre Coastline Mosaic blends sun-warmed ochre with oceanic blues in a modern, tile-inspired pattern—perfect for living rooms, bedrooms, nurseries, or entryways. All wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.
Key Features
Removable and renter-friendly: Designed to come down cleanly from properly prepared walls.
Premium look: Matte, richly detailed print enhances texture and depth.
Health-conscious: PVC-free substrate printed with eco-friendly, water-based inks.
Sized for real rooms: Rolls are 24 inches wide (about 61 cm) and available up to 120 inches high (about 305 cm).
Seamless repeat: Pattern engineered for crisp alignment across panels.
Made to order: Produced on demand to reduce waste and ensure fresh, consistent color.
Sizing & Coverage
Each roll covers a 24 inch-wide vertical panel. Measure your wall width and divide by 24 inches to estimate how many rolls you need. Choose a roll height that meets or slightly exceeds your wall height (you can trim the excess during install).
Example: A 10 ft-wide wall typically needs 5 rolls (10 ft = 120 in; 120 ÷ 24 = 5).
Heights available up to 120 inches to fit standard and taller ceilings.
Order all rolls at the same time to ensure dye-lot consistency.
Installation Guidance
Prepare the surface: Install on smooth, clean, dry, and fully cured painted walls (allow new paint to cure for at least 30 days). Remove dust and any grease. Avoid heavily textured or dirty surfaces.
Plan your layout: Mark a plumb line to keep the first panel perfectly vertical. Lay out panels in order to maintain the pattern flow.
Apply the first panel: Starting at the top, position the panel along the plumb line and smooth outward to remove air bubbles.
Align the pattern: Butt or lightly overlap edges as directed by the print repeat, matching the mosaic for a seamless look. Smooth as you go.
Trim edges: Use a sharp blade to trim along ceilings, baseboards, and around outlets.
Removal: Peel slowly at a low angle. If resistance is felt, warm the panel slightly and continue steadily.
Care & Maintenance
Wipe gently with a soft, damp cloth. Avoid abrasive pads or harsh chemicals (no bleach or ammonia).
Do not soak. For stains, use mild soap and water, then pat dry.
Avoid direct, continuous steam or high-humidity areas like shower enclosures.
Best results on smooth, primed walls; stain-resistant or low-surface-energy paints may reduce adhesion.
Good to Know
Color can vary by monitor and print run; order enough for your full project at once.
Intended for interior residential use on properly prepared walls.
PVC-free material and water-based inks support a lower-impact, low-odor installation.
