Bring the character of timeworn masonry to your space with a removable wallpaper that looks like real brick—without the dust or demo. Authentic Aged Brick Facade features nuanced tones, mortar details, and a matte finish for a convincingly vintage, industrial look. Every roll is PVC-free and printed with eco-friendly, water-based inks for a cleaner, low-odor upgrade to your walls.
Size and Coverage
Panel width: 24 inches
Custom height: up to 120 inches per panel
Panels install edge-to-edge for a continuous brick facade
Key Features
Realistic aged brick artwork with rich texture and depth
PVC-free material printed with eco-friendly, water-based inks
Low-glare, matte finish for a natural, photo-real look
Removable design that’s renter-friendly and damage-conscious
Aligns cleanly for near-seamless joins between 24-inch panels
Ideal for accent walls, living rooms, studios, and offices
Before You Order
Measure the wall width and divide by 24 inches to estimate the number of panels needed; add 10% for trimming and pattern alignment.
Install on smooth, clean, dry, and primed walls. Fresh paint should cure fully (typically 30 days).
Not recommended for heavy texture, high humidity, or stain-resistant/low-VOC paints that can reduce adhesion.
Order a sample to confirm color and scale in your lighting.
Installation Guidance
Unroll and let panels acclimate in the installation room for 24 hours.
Mark a plumb line to keep your first panel perfectly straight.
Apply using the method suited to your wallpaper type. For peel-and-stick: peel a small section of liner, adhere from the top, and smooth down gradually. For paste-the-wall: apply a thin, even coat of clear, strippable adhesive and hang the panel from top to bottom.
Smooth outward with a wallpaper tool to remove air and ensure firm contact.
Butt seams (do not overlap) and align the brick pattern as you go.
Trim at ceilings, baseboards, and around outlets using a sharp blade.
To remove, lift a corner and peel back slowly at a low angle. If adhesive was used, soften with warm water as needed and pull gently.
Care Instructions
Wipe with a soft, damp cloth as needed; avoid abrasive cleaners and scrubbing seams.
Keep away from direct heat sources and prolonged moisture.
Avoid harsh chemicals to preserve print vibrancy and finish.
Good to Know
PVC-free substrate and water-based inks support healthier indoor air.
Color can vary slightly between batches; purchase panels together for the best match.
