Artisan's Crosshatch Canvas

Refined, removable wallpaper for modern home decor

Artisan's Crosshatch Canvas brings a handcrafted, canvas-inspired crosshatch pattern to your walls with the ease of removable wallpaper. Designed for renters and refreshers alike, it delivers texture-rich depth in a clean, modern style—without long-term commitment. Our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.

Key features

• Removable and renter-friendly: Install, reposition, and remove with minimal residue.
• Eco-conscious print: PVC-free substrate printed with eco-friendly, water-based inks.
• Clean, matte look: Subtle crosshatch pattern adds visual texture without shine.
• Sized for real rooms: Panels are 24 inches wide with custom heights up to 120 inches.
• Seam-friendly design: Intended to align panel-to-panel for a polished, continuous look.
• Low-odor and indoor-safe: Ideal for living rooms, bedrooms, offices, and more.

Sizing and coverage

Each roll covers a panel 24 inches wide. Choose a height up to 120 inches to fit your wall. To estimate how many panels you need, measure the wall width in inches, divide by 24, and round up. Add 1–2 inches to the height for trimming at the top and bottom.

Installation guidance

For best results, apply to smooth, clean, and dry painted walls. Allow fresh paint to cure for at least 30 days. Not recommended over heavy texture, unsealed surfaces, or areas with direct water contact.

1. Unroll panels and let them flatten and acclimate for 24 hours in the room of installation.
2. Clean the wall with mild soap and water; rinse and let dry completely.
3. Mark a straight, vertical guideline (plumb line) where the first panel will go.
4. Starting at the top, peel 6–12 inches of the backing and apply the panel along the guideline.
5. Smooth outward with a squeegee or soft cloth, peeling more backing as you go to avoid bubbles.
6. Install the next panel, aligning the pattern with a slight overlap if needed for a seamless look. Do not stretch the material.
7. Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
8. To remove, slowly peel back at a low angle. If any residue remains, wipe gently with warm, soapy water.

Care instructions

• Wipe clean with a soft, damp cloth; use mild soap for spots if needed.
• Avoid harsh chemicals, bleach, or abrasive scrubbers.
• Do not soak. Prolonged exposure to steam or high heat may affect adhesion.
• If an edge lifts, press back onto a clean, dry surface to re-adhere.