Bring the warmth of hand-stacked wood to any space with this removable wallpaper inspired by artisan timber walls. The richly layered grain and natural tones create a dimensional, rustic-modern accent that’s perfect for living rooms, bedrooms, hallways, and renter-friendly makeovers.
Made with a PVC-free material and printed using eco-friendly, water-based inks, this design delivers a beautiful, low-odor finish you can feel good about bringing into your home.
Key Features
Removable, renter-friendly wallpaper with a realistic stacked timber look
Rolls measure 24 inches wide and up to 120 inches high for floor-to-ceiling coverage
PVC-free material printed with eco-friendly, water-based inks
Matte finish reduces glare and enhances natural wood detail
Edge-to-edge alignment for a seamless, professional installation
Great for accent walls, entryways, and feature niches
Sizing and Coverage
Each roll is 24 inches wide and cut to your selected height (up to 120 inches). Measure your wall width and divide by 24 to estimate how many rolls you’ll need. Consider a small margin for trimming and pattern alignment.
Example: A 108-inch-wide wall typically needs 5 rolls (108 ÷ 24 = 4.5, round up).
Order the height closest to your wall height for the cleanest top and bottom trims.
Installation Guidance
Prep the wall: Apply to smooth, clean, dry, and fully cured paint (wait 30 days after painting). Wipe away dust and oils. Mark a straight plumb line to start your first roll.
Hanging:
If self-adhesive: Peel 6–12 inches of the backing, align to your plumb line, and smooth downward with a felt squeegee. Continue peeling and smoothing in small sections, avoiding stretch.
If using paste: Apply a high-quality, strippable wallpaper adhesive per manufacturer instructions. Hang to the plumb line, smooth air bubbles outward, and wipe excess paste immediately.
Seams: Butt edges carefully for a tight, seamless look. Work panel by panel, ensuring the pattern aligns.
Trim and set: Use a sharp blade and straightedge to trim at ceilings, baseboards, and openings. Allow 24 hours for the adhesive to set.
Note: Best on smooth, non-textured walls. Not recommended for heavy texture, raw plaster, or surfaces with moisture issues.
Care and Removal
Dust regularly; spot clean with a soft, damp cloth and mild soap only
Avoid harsh cleaners, bleach, abrasives, and excessive scrubbing
Ensure good ventilation in humid areas; avoid direct water contact
To remove, lift a corner and peel back slowly at a low angle; warm gently with a hair dryer if needed
Eco Commitment
This wallpaper is PVC-free and printed with eco-friendly, water-based inks—made to be beautiful on your walls and better for your home.
