Bring a refined, urban edge to your space with Architectural Concrete Grid. This removable wallpaper layers a clean, architectural grid over a soft concrete-inspired texture, creating a modern backdrop that suits living rooms, bedrooms, offices, and entryways.
All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact refresh.
Key Features
Removable wallpaper designed for easy updates and style changes
Panels measure 24 inches wide and up to 120 inches high
PVC-free material printed with eco-friendly, water-based inks
Crisp grid lines and subtle concrete texture for a modern, architectural look
Edge-to-edge panel alignment for a continuous, cohesive design
Sizing and Coverage
Measure your wall height and width to determine how many panels you need.
Select the panel height that matches or slightly exceeds your wall height (up to 120 inches) to allow for trimming at the ceiling and baseboards.
Calculate the number of panels by dividing your wall width by 24 inches and rounding up to the next whole number.
For multi-wall installations, repeat the calculation per wall for the cleanest results.
Example: A 10-foot (120-inch) wide wall typically needs 5 panels at 24 inches each.
Installation Guidance
Ensure the surface is smooth, clean, dry, and primed. Freshly painted walls should cure fully (typically 30 days).
Mark a plumb vertical line to guide your first panel.
Apply per the adhesive method supplied with your wallpaper (peel-and-stick or paste-the-wall). Align the first panel to the plumb line.
Smooth from the center outward with a wallpaper tool, removing bubbles as you go.
Hang subsequent panels edge-to-edge (do not overlap) to maintain the grid alignment.
Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
Tip: Step back after each panel to confirm the grid lines remain straight and aligned.
Care Instructions
Wipe gently with a soft, damp cloth; use mild soap if needed.
Avoid abrasive scrubbers, bleach, and harsh solvents.
Not recommended for direct water exposure or high-steam zones (e.g., inside showers).
Test any cleaner on a small, inconspicuous area first.
Removal
Peel slowly at a low angle. If needed, slightly warm the panel with a hair dryer on low heat to ease release. Remove any remaining adhesive with a mild, residue-free cleaner on a soft cloth.
Good to Know
Best on smooth, non-textured, properly primed walls. Not advised for textured paint, brick, or unsealed surfaces.
Order all panels at the same time for the best color continuity.
Allow panels to acclimate to room temperature before installation for optimal handling.
